Summer Starts Here - Save up to 70%
Curt T-Connector Vehicle Wiring Harness Installation - 2011 Mitsubishi Endeavor- Video
Today in our 2011 Mitsubishi Endeavor, we're gonna be installing Curt's T-connector vehicle wiring harness with four pole flat trailer connector. This four pole vehicle wiring harness is gonna provide you with all the necessary lighting you need for your trailer. This includes your left turn signal, right turn signal, tail lamps and brake lamps, so you'll be D.O.T compliant in all states.What's nice about this is that it has its own control unit. The control box that comes with it will isolate your trailer wiring from your vehicle wiring. That way if you have any faults on your wiring it won't affect the wiring on your vehicle.On the end here you'll also receive a dust cap so when you're not using your connector you can place it on. This will keep out any dirt and debris, insuring a long lasting connection. more
2/20/2019 10:02:10 AM
Trailer Wiring Harness Installation - 2011 Mitsubishi Endeavor- Video
Today on our 2011 Mitsubishi Endeavor we'll be installing the Tow Ready custom-fit vehicle wiring, part number 118516. Now to begin our installation we'll open the rear cargo door, remove the cargo area floor exposing the spare tire. We'll then remove the two strap-down hooks here on the left side, which will allow us to remove the driver side cargo floor. This will expose our trailer wiring. Now you'll see here that the wire harness is neatly tucked into the inner fender well here. We'll remove it where we can take our new t-one connector and plug it in. With it plugged in we'll remove the adhesive backing off of our t-one box and stick it to the floor pan. more
1/20/2015 9:56:17 AM
Filter Videos
Filter Videos
